Safety and legal recommendations

1.1 LEGAL INFORMATION

All rights reserved. This publication may not be reproduced, copied or stored on a memory device. Furthermore, this publication may not be used for any purpose other than as the instructions for the use of the MESI mTABLET. This publication may not be translated into other languages or converted into other formats in any way without the prior written permission of MESI ltd.

The contents of the instructions for use may be altered without notice. The latest version of the instructions for use is available at www.mesimedical.com.

1.2 SAFETY INFORMATION

To avoid personal injury and/or damaging the device or accessories, follow the safety recommendations given below.

The device must be set up by authorized personnel with adequate professional training and experience who are aware of all the dangers in relation to the setup of the device and its use and who will take adequate risk prevention measures for themselves, users, other personnel and devices.

Only authorized persons may be given access.

Local safety requirements are to be complied with, if so required by regulations. In addition to local safety regulations, the safety instructions in this document are also to be complied with. Should there be any conflict between the safety recommendations in this document and the recommendations stipulated by local regulations, the local regulations take precedence.

MESI mTABLET & MESI mRECORDS

2.1 MESI mTABLET

MESI mTABLET is the heart of the MESI system of diagnostic tools. It enables medical personnel to manage all the different diagnostic modules with one device - from running measurements to storing their results. Measurements are saved and linked directly to the patient record, which reduces the loss of data and provides medical personnel with a better overview of patient medical history. With the MESI mTABLET, the user is also given access to web-based application MESI mRECORDS, where additional diagnostic tools and patient management is possible.

2.2 MESI mRECORDS

MESI mRECORDS can be accessed with the same user login data as MESI mTABLET at https://mrecords.mesimedical.com. Since MESI mRECORDS is a web app this gives you access from anywhere and anytime. All measurements and patient data is synced between the MESI mTABLET and MESI mRECORDS, thus giving the medical expert access to recorded measurement instantly.

For more information and tutorials please log-in or register your account on https://mrecords.mesimedical.com.

Product description

3.1 INTENDED USE

The MESI mTABLET is a handheld medical grade tablet unit and a MESI mTABLET docking station with access point. MESI mTABLET is designed to connect patients, measurements, medical applications and medical personnel within one ecosystem.

MESI mTABLET UNIT is intended to be used either as a standalone solution with a variety of different software or with diagnostic modules.

It is intended to be used exclusively by healthcare professionals in clinical, home, and long-term care settings. The expected user can use and knows how to operate smart phones or tablet computers.

The device can be recharged through AC/DC power supply.

3.2 WHAT IS IN THE PACKAGE

Your package includes the following equipment:

• MESI mTABLET UNIT (MTABMD)

• MESI mTABLET WI-FI DOCKING UNIT (MTABDSW)

• Power adapter

• Network cable

• User manual

3.2.1. ACCESSORIES

Please contact your local distributor for more information about MESI mTABLET accessories; such as carry bags, trolleys etc.

Technical specifications

Following are the technical information regarding MESI mTABLET, its operating system and accessories provided within the package.

4.1 MESI mTABLET

4.1.1 DIMENSIONS

Width: 199 mm

Depth: 35 mm

Height: 278 mm

Weight: 800 g

4.1.2 POWER & BATTERY

4.1.3 CLASSIFICATION

Protection against electric shock: Class II equipment

Software safety classification: Class B

4.1.4 LED INDICATIONS MTABDSW

Green LED: Displays connection state (fixed light)

Orange LED: Represents LAN activity

4.1.5 LED INDICATIONS MTABMD

Green LED: Device is charging

Red LED: Device battery is low

White LED(Blinking): Device is starting

4.1.6 LED INDICATIONS POWER SUPPLY

Green LED: Power “ON”

4.1.7 MTABMD SPECIFICATIONS

4.1.8 CONNECTIVITY

Bluetooth

Wi-Fi

LTE

EMEA/ South Korea/ South Asia/ Latin America/ India/ Australia/New Zealand/ South Africa

North America

Japan

Ethernet connection

10/100 Mbps Between MTABDSW and LAN Ethernet connection.

4.1.9 OPERATING CONDITIONS

4.1.10 TRANSPORT & STORAGE CONDITIONS

⚠️ Operating or storing the device outside the specified conditions may lead to malfunction, reduced battery life, or safety hazards.

NOTE: When storing the device for more than 3 months, ensure the battery remains at 40–60% charge. Recharge the battery every 3–6 months to maintain a voltage of 3.7–4.0 V. Store in a cool and dry environment.

Getting started

5.1. MESI mTABLET UNBOXING

Before you start, you will need to set up all the components in your practice.

Step 1

Connect your charging station to the mains and to the local area network with the network cable and power adapter provided.

Step 2

Turn on your MESI mTABLET UNIT with the power button and set it on the charging dock to fully charge it.

After all the components are set the MESI mTABLET will connect automatically to the MTABDSW Wi-Fi and is ready to use.

5.2. SET UP

The first time you use the MESI mTABLET you will need to go through a setup process, which establishes the system according to your preferences. The guided process begins when you start your device for the first time and shouldn’t take more than 10 minutes.

The first part is the technical set up, which is only done by the first user. This includes setting up additional WI-FI connections and deciding on language use.

The second part is establishing your user account, which will be used to access your patient’s data on the MESI mTABLET UNIT or MESI mRECORDS.

Step 1 - Languages

Since the MESI mTABLET UNIT offers several languages, select the language you wish to use from the drop-down menu. This setting can be changed later in user settings.

Step 2 - Wi-Fi

The MESI mTABLET WI-FI DOCKING UNIT for the MESI mTABLET UNIT comes with a built-in Wi-Fi access point to which the MESI mTABLET UNIT will connect automatically on first use.

If another wireless network is desired, please select it from the list and enter security information.

Wi-Fi is not required for the essential functions of the MESI mTABLET, but it is necessary for measurements to be synced to the MESI mRECORDS web application.

Step 3 - Register

Each user accessing the MESI mTABLET needs to register an account, which will also enable them to access data securely on other devices (personal computer, tablet, phone if needed).

To secure your account, we provide a two-step verification process - meaning you need to confirm the account with your e-mail account, as well as with your mobile phone.

Step 4 - Licence Agreement

Before you start using the device, you will need to agree to the terms and conditions. This includes privacy policies and how we handle your data. You can always review it in the MESI mRECORDS web app. The account is not created until you have read and agreed with the terms and conditions.

Step 5 - Registration

Registration is the part where you insert your personal information like Name, Surname, Specialisation and where you choose all your passwords and lock code for fast tablet access.

Step 6 - Choose avatar

For faster identification of your profile, you can choose your avatar from a set that is provided at this step. Profile image can be changed later on under user settings either on MESI mTABLET UNIT or in MESI mRECORDS.

User types

Registered users are set into working groups which, depending on their user profile have different rights.

Users are separated into two groups "doctor" and "nurse". A doctor can create and is a working group owner, giving him the option to invite other doctors or nurses into his working group. A “nurse” profile, on the other hand, can only access the MESI mTABLET UNIT in cases where the doctor has invited her into his/her working group. This access can be revoked at any time by the working group owner.

Step 7 - Practice info

Like a real practice, the MESI mTABLET system connects medical personnel in a working group environment. They are created to enable patient data sharing between practice staff and at the same time protect it.

Adding users to your working group helps you share patient data with your coworkers.

The first time you use the tablet, enter the e-mails of your co-workers. If they already have an account registered, they will become a part of your working group and if not, they will get an invitation in their e-mail inbox to register online.

Adding users into your working group is optional at this point. If you want to add users at another time, go to Doctor > Settings > Working groups.

Step 8 - Working groups

Each doctor can be the owner of only one working group but can be invited into multiple working groups. At the same time, he can add multiple nurses or doctors into his/her working group. Nurses, on the other hand, can be part of many working groups, but they can’t create one or add more people to it. This system enables greater oversight of patient data access.

NOTE: the 1st user that registers becomes the MESI mTABLET UNIT owner which has the highest level of authority on the MESI mTABLET UNIT. This user has the privilege to remove unnecessary accounts and paired modules from the MESI mTABLET UNIT.

5.3. PAIRING A DIAGNOSTIC MODULE

Before any recordings can be performed, the appropriate module needs to be paired to your MESI mTABLET UNIT. Please take the MESI mTABLET UNIT and open user tab (for more information about user accounts please see the chapter 9 Managing users).

Step 1

Go to User profile > Settings > Modules > +Add module

Step 2

Press button on top of the appropriate module.

NOTE: If you are operating only with one MESI mTABLET UNIT, then performing this operation is required only once. In case of more MESI mTABLET UNIT this process will have to be repeated on each MESI mTABLET UNIT

Step 3

When the MESI mTABLET UNIT establishes a connection with the module, the light on top of the module will change. Confirm the pairing process by pressing the button on top of the module again.

Step 4

Final screen indicates successful connection between the MESI mTABLET UNIT and the wireless module. You can access all technical information about the connected modules in User profile > Settings > Modules.

Performing your first measurement

Performing your first measurement is a straightforward task. As you are already signed in to your account, you will need to follow the steps below.

Step 1 - Add first patient

On your home screen, press the + button in the Patient tab.

Step 2 - Fill out patient’s data

Fill out required fields (Name, Surname, Date of Birth and Gender) and any additional information regarding the patient. Save the patient by pressing the ✅ button.

NOTE: There are also ways to import patients from your EHR to MESI mRECORDS, which will then sync with MTABMD. Please contact your local MESI representative.

NOTE: When creating your profile a "Test patient" is added to your working group to help with initial adjusting to MESI mTABLET interface. This patient will be automatically removed after 2 weeks or it can be removed by a user on MESI mRECORDS.

Step 3 - Select measurement

Once you have added the patient, tap the Applications tab (lower part of the screen) to bring up the home screen. Each measurement has its own icon and you choose one by tapping it.

Step 4 - Prepare diagnostic module

When you access the desired measurement, there will be instructions on screen on how to apply the wireless module in the right way. Swipe left or right to see all instruction steps. When the START button becomes green, you can start the measurement.

Step 5 - Measurement

The measurement screens depend on the type of measurement being performed. Most measurements will have some graphic representations of measurement in real time (graphs or progress bar) and other parameters specific to the measurement (consult the specific diagnostic module user manual for more details).

Step 6 - Results

When the measurement process is completed, the MESI mTABLET UNIT screen displays the result. It consists of five different areas: navigation area, numerical result with interpretations, visual representations, patient’s history of measurement and comments on the result.

All the buttons and information placed in the navigation area are there to help you f ind your way around the application. You can toggle between previous results of the patient. If you are not satisfied with the recording for any reason, you can quickly discard it, or in the case of uncertainty you can consult with other doctors by simply entering their e-mail addresses. It also contains the names of both the doctor performing the recording and the patient.

The numerical result is a combination of the calculated results and measured values. Tap to show more in-depth interpretations.

Visual representations of the measurement depend on the measurement type. For more information please see the instructions for use that came with diagnostic module

History holds an overview of recordings done by the same doctor on the same patient. It shows the trend of the patient’s results.

A comment can be added to every measurement. It will be stored and always available together with the recording report.

For more information on the specific result form, see the measurement user manual, which you will have received along with the diagnostic module.

User profile

7.1 LOG IN AND REGISTRATION

To freely use the MESI mTABLET UNIT, you need to be listed as a tablet user. This can be done in two ways:

• Registration

• Log in with existing account

Registration

If you want to register as a new user, tap in the right upper corner of the lock screen (Register). It will lead you to the registration form.

Log in with existing account

If you have registered online, you need to log in with your e-mail and password so the tablet can recognize you. Once you are listed as a tablet user, you will be able to access your data with your 4-digit lock code only.

7.2 ARCHIVE

The Archive is the fastest way to reach your previous measurements. All measurements are chronologically sorted from the oldest to the newest.

Every date entry shows patients, time and type of measurement performed. Tapping the tile shows you the result.

7.3 SHARED RESULTS

All measurements or recordings shared with specialists outside of your working group will be displayed here. Next to the measurement, you are presented with information such as when the measurement was sent, to whom it was sent and until when the access link is valid.

7.4 SETTINGS

Settings is the place for all doctor’s/nurse’s information, passwords, serial numbers, module pairing, user management etc. Anything that is not directly connected to a measurement is found here.

Patient

8.1 PATIENT SELECTION

Since MESI mTABLET works as your medical cabinet, there is place to store patient information. Once you put it in, it will be there whenever you need it. You only need to fill out patient data form once. When you add the patient, they will appear on the patient list and you will be able to access their data with one tap.

8.1.1 ADDING THE PATIENT

Step 1

On your home screen, press the ➕ button in the Patient tab.

Step 2

Fill out required fields (Name, Surname, Date of Birth and Gender) and any additional information regarding the patient.

Step 3

Save the patient by pressing the ✔️ button.

8.1.2 SELECTING THE PATIENT

Step 1

Press Patient tab button on your home screen.

Step 2

Use search bar (1) or scroll (2) to the patient who is having the ECG recorded.

Step 3

Select the patient.

8.1.3 IMPORT EXISTING PATIENT LIST

To import an existing patient list from your EHR please visit MESI mRECORDS (mrecods.mesimedical.com) and log-in to your account. Once logged in access your profile settings and follow the instructions under the category: “Connectivity”.

Patients can also be imported directly from patient screen by clicking "Import patients" button.

8.2 PATIENT PROFILE

You can edit your patient’s data in the Patient’s tab by choosing “Profile”. Name & surname, insurance ID, date of birth, gender and race – are all required.

If needed, their home address, telephone number and e-mail address can be added to their profile.

NOTE: Deleting a patient is only possible on mrecords.mesimedical.com.

8.3 PATIENT ARCHIVE

Similarly to the doctor’s, a patient’s profile also holds an archive of their measurements, chronologically arranged with the newest measurements at the top.

8.4 PATIENT CHARTS

You can check all of your patient measurements in “Charts”. Every measurement is put conveniently into a chart which shows trends in the patients results.

Managing users

9.1 ADDING & REMOVING USERS

The first account that is registered on the tablet (or the first user) holds the administrative rights. Under administrator profile settings there is another category called “Users”, where users can be removed from the MESI mTABLET (accounts are removed but not deleted).

A removed user can still access all his data through MESI mRECORDS and list themselves on the tablet by logging in again on the Lock screen.

9.2 PATIENT DATA SHARING PRIVILEGES

The MESI diagnostic system is built around real-life working relationships. The doctor is the owner of the working group and can share his/her patient data with the nurses added to his/her working group.

If you log in as a nurse, you first need to choose in which working group you want to perform measurements. Every member of a working group has access to the same data - patients, measurements, charts.

MESI mTABLET maintenance

10.1 CHARGING THE BATTERY AND STORING

If you wish to use the device on battery power, you must ensure that MESI mTABLET MAINTENANCE the battery is charged regularly. Between use the MESI mTABLET UNIT should be placed on the MESI mTABLET WI-FI DOCKING UNIT to charge its battery.

If the capacity of the battery is significantly decreased after a certain period of intensive use, the battery is most likely worn out and you should contact your dealer or the manufacturer about replacing the battery.

When the device is charging the display on MESI mTABLET UNIT will be displaying charging status.

10.2 CLEANING INSTRUCTIONS

Cleaning the device regularly with a soft, dry or slightly damp cloth – is recommended. Do not use aggressive cleaning agents, volatile liquids or excessive force when cleaning the device.

10.3 PRODUCT LIFE AND STORAGE

If correctly used and maintained the device will have a minimum service life of 5 years. The device can be stored under suitable conditions for a maximum of 5 years. When using the device after storage, we recommend that you carry out a thorough maintenance check on the device.

10.4 NETWORK CONNECTIVITY AND INTEGRATION REQUIREMENTS

The mTABLET may be connected to an IT-NETWORK (e.g., hospital network or cloud infrastructure) to support integration with healthcare information systems, secure data transmission, and remote service access. This section outlines the technical and procedural requirements for safe and effective network integration.

a) Purpose of the mTABLET connection to an IT-NETWORK

The mTABLET connects to an IT-NETWORK to:

• Synchronize data with cloud services (optional)

• Exchange patient and measurement data with hospital information systems (HIS/EHR)

• Enable secure remote maintenance and software updates (where applicable)

b) Required characteristics of the IT-NETWORK

The IT-NETWORK must fulfill the following characteristics:

• Support for standard TCP/IP communication

• 2.4GHz or 5GHz Wi-Fi or Ethernet (mTABLET dock)

• WPA2 or WPA3 encryption (Enterprise or PSK)

• Sufficient bandwidth for low-latency medical data transmission

c) Required configuration of the IT-NETWORK

The IT-NETWORK should be configured with:

• DHCP or Static IP assignment

• Open ports for HTTPS (443), and DNS (53)

• Allowed outbound access to MESI cloud services (if cloud is used)

• Correct certificate and identity management (if WPA2-Enterprise or EAP is used)

d) Technical specifications of the network connection, including security specifications

Transport protocols: HTTPS over TLS 1.2 or higher

• Application protocols: REST API, GDT, HL7, DICOM, XML, JSON or proprietary integration formats

• Data encryption: all transmitted patient and system data is encrypted in transit

e) Intended information flow

Information is routed via secure channels and does not traverse public networks unless explicitly configured for cloud operation.

f) Hazardous Situations from IT-NETWORK Failures

The following hazardous situations may arise if the IT-NETWORK does not meet required characteristics:

• Loss or delay of critical medical data

• Incomplete synchronization leading to outdated records

• Unauthorized data access due to misconfigured firewalls or certificates

• Network downtime causing delayed diagnostics or workflow disruptions

NOTE: In the event of IT-NETWORK failure, the mTABLET continues to operate in standalone mode. All locally stored measurement results and patient data remain accessible to the user directly on the device, ensuring continuity of care even when network connectivity is lost.

Information for the Responsible Organization

The responsible organization (e.g., hospital IT department) is accountable for ensuring that the network environment where the mTABLET operates complies with the following:

• Proper segmentation and access control for medical devices

• Secure and reliable wireless or wired infrastructure

• Routine patching and monitoring of the network and access points

• Risk assessment when modifying the network or adding new devices

Changes to the network that may impact device performance include:

• Reconfiguration of switches, firewalls, or Wi-Fi access points

• Network topology changes or bandwidth limitations

• Introduction of new connected devices that may overload the infrastructure

NOTE: The mTABLET is validated by the MANUFACTURER for operation over standard networks but is not validated for all possible IT-NETWORK configurations. The final network design and integration remain under the responsibility of the healthcare organization or integrator.

Summary of Network Risks

The MESI mTABLET system depends on secure network communication for functions such as cloud synchronization, analytics, remote configuration, and integration with third-party systems. The following network-related risks have been identified during the cybersecurity threat modeling process:

NOTE: Even in the case of full IT-NETWORK failure, the MESI mTABLET remains operational in standalone mode. All locally stored patient data and test results remain accessible directly on the device, ensuring uninterrupted use at the point of care.

General warnings

Before using the device for the first time, read the user manual carefully and follow the recommendations and suggestions.

⚠️ MESI mTABLET users must be adequately trained to use the device. Before first use of the device, users must carefully read the entire usage instructions and follow the instructions for use of the connected equipment.

⚠️ MESI mTABLET complies with EMC regulations for medical products, which gives details about protection against emissions and electrical interference. However, special care must be exercised when the unit is used with high frequency equipment.

⚠️ Use only accessories and other parts recommended or supplied by MESI. Use of other than recommended or supplied parts may result in injury, inaccurate information and/ or damage to the unit.

⚠️This product is not designed for sterile use.

⚠️Do not use this unit in areas where there is any danger of explosion or the presence of flammable gases such as anaesthetic agents.

⚠️Use only real patient data when creating new profiles, as certain patient data (date of birth, sex, race) impact the performance of different automated interpretive algorithms.

11.1 MAINTENANCE

⚠️If the device is used or stored outside the specified temperature and air humidity ranges, the accuracy specified within the technical specifications of the device is not guaranteed.

⚠️Before cleaning, disconnect from the mains.

⚠️Do not use the device when wet. After cleaning the device with a damp cloth, wait for it to dry. Only use the device when it is completely dry.

⚠️Do not, under any circumstances, immerse the unit or cable assemblies in liquid.

⚠️Only use non-aggressive cleaning agents to clean the device. The device may be wiped with a damp cloth.

⚠️Do not use high temperature sterilization processes (such as autoclaving). Do not use e-beam or gamma radiation sterilization.

⚠️Make sure that the device does not come into contact with an electrical current while it is being cleaned.

⚠️Do not dispose of the device as unsorted municipal waste. Prepare it for recycling or separate waste collection in accordance with Directive 2002/96/EC on scrap electrical and electronic equipment (WEEE).

⚠️To prevent electric shock hazards due to current leakage, only use AC/DC power supplies that are compliant with the technical specifications of the device. The AC/DC power supply must be connected to an easily accessible socket (the AC/ DC power supply also serves as galvanic isolation).

⚠️The AC/DC power supply must be connected to an easily accessible socket (the AC/ DC power supply also serves as galvanic isolation).

⚠️To prevent electric shock, do not disassemble the unit. There are no serviceable parts inside. Refer servicing to qualified personnel only.

11.2 FUNCTIONING OF THE DEVICE

⚠️The device must only be operated using battery power if the earth connection is suspect or if the mains lead is damaged or suspected of being damaged.

⚠️Protect the device from moisture and liquids and extremely high/low temperatures. Also, protect the device from mechanical stress and do not expose it to direct sunlight, as this may cause the device to not function properly.

⚠️Never carry out repairs of any kind yourself. Do not open the device. The device does not contain any parts which can be replaced by the user. Do not alter or adapt the device. If a defect occurs, consult your dealer or distributor.

⚠️Important information on electromagnetic compatibility (EMC). As the number of electronic devices such as computers and mobile phones in the room increases, medical devices can become sensitive to the electromagnetic influences of other devices. Electromagnetic interference can cause medical devices to malfunction, which can potentially lead to dangerous situations. Furthermore, medical devices must not interfere with other devices. The IEC/EN 60601-1-2 standard was introduced due to the necessity to establish electromagnetic compatibility (EMC) requirements for the prevention of dangerous situations in the use of medical devices. The standard defines the level of resistance to electromagnetic interference for medical devices. This medical device is compliant with the IEC/EN 60601-1-2 standard in terms of resistance to electromagnetic interference and electromagnetic emissions. Nevertheless, do not use mobile phones and similar devices which create strong electromagnetic fields in the vicinity of the device. This can cause the device to malfunction, which can potentially cause a dangerous situation.

⚠️Portable RF communications equipment including peripherals such as antenna cables and external antennas should be used no closer than 30 cm (12 inches) to any part of the device including cables specified by the manufacturer. Otherwise degradation of the performance of this equipment could result.

⚠️Use of this equipment adjacent to or stacked with other equipment should be avoided because it could result in improper operation. If such use is necessary, this equipment should be observed to verify that they are operating normally.

⚠️ The  4-port charging station, 2-port charging station and MESI mTABLET WI-FI DOCKING UNIT  are intended for use only in dry, indoor environments. These components must be kept away from water, moisture, and liquids at all times. They are not designed for use in wet areas (such as bathrooms or kitchens) and must not come into direct contact with the patient. Use only as instructed to avoid the risk of electric shock or malfunction.

⚠️ Do not position the ME EQUIPMENT so that it is difficult to operate the disconnection device.

⚠️ AC/DC power supply unit is considered as disconnecting device from the mains.

Warranty information

A warranty period applies to the device, starting from the date of purchase (delivery date shown on the invoice). Warranty claims will only be valid if accompanied by the purchase receipt.

More details about the warranty can be found in the warranty booklet attached to the instructions for use provided.

12.1 EXTENDED WARRANTY AND OTHER MESIcare SERVICES

MESIcare is a service which ensures the flawless operation of the device and all of its accessories (patient cables, AC/DC power supply, stand) for the duration of the warranty period. In addition to flawless operation, the service also includes annual calibrations, the immediate replacement of damaged or destroyed components and software upgrades.

MESIcare services

• Extension of the basic warranty for an agreed period.

• Immediate replacement of damaged or destroyed components which are not included in the basic warranty.

• Annual calibrations for an agreed period.

• Software upgrades.

Contact your dealer or the manufacturer for more information.

Standard compliance

Product development was carried out in accordance with the Medical Device Regulation (EU) 2017/745, All relevant standards listed in the table below were also met.

13.1 MANUFACTURER DECLARATION ON EMC

The MESI mTABLET is intended for use in the electromagnetic environment specified below. The customer or the user of the above models should ensure that they are used in such environment.

The MESI mTABLET is intended for use in the electromagnetic environment specified below. The customer or the user of the above models should assure that they are used in such environment.

Enclosure Port

The MESI mTABLET is intended for use in the electromagnetic environment specified below. The customer or the user of the above listed models should assure that they are used in such an environment.

Input a.c. power PORT

Comment: a) Not applicable to CLASS II ME EQUIPMENT and ME SYSTEMS.

b) The ISM (industrial, scientific and medical) bands between 0.15 MHz and 80 MHz are: 6.765 MHz to 6.795 MHz; 13.553 MHz to 13.567 MHz; 26.957 MHz to 27.283 MHz; and 40.66 MHz to 40.70 MHz. The amateur radio bands between 0.15 MHz and 80 MHz are: 1.8 MHz to 2.0 MHz, 3.5 MHz to 4.0 MHz, 5.3 MHz to 5.4 MHz, 7 MHz to 7.3 MHz, 10.1 MHz to 10.15 MHz, 14 MHz to 14.2 MHz, 18.07 MHz to 18.17 MHz, 21.0 MHz to 21.4 MHz, 24.89 MHz to 24.99 MHz, 28.0 MHz to 29.7 MHz, and 50.0 MHz to 54.0 MHz.

The MESI mTABLET is intended for use in the electromagnetic environment specified below. The customer or the user of the above listed models should ensure that they are used in such environment.

Signal input/output parts PORT

Comment: *Not applicable, unit, without Signal input/output parts PORT

a) SIP/SOPS whose maximum cable length is less than 3 m in length are excluded.

b) This test applies only to output lines intended to connect directly to outdoor cables.

c) The ISM (industrial, scientific and medical) bands between 0.15 MHz and 80 MHz are: 6.765 MHz to 6.795 MHz; 13.553 MHz to 13.567 MHz; 26.957 MHz to 27.283 MHz; and 40.66 MHz to 40.70 MHz. The amateur radio bands between 0.15 MHz and 80 MHz are: 1.8 MHz to 2.0 MHz, 3.5 MHz to 4.0 MHz, 5.3 MHz to 5.4 MHz, 7 MHz to 7.3 MHz, 10.1 MHz to 10.15 MHz, 14 MHz to 14.2 MHz, 18.07 MHz to 18.17 MHz, 21.0 MHz to 21.4 MHz, 24.89 MHz to 24.99 MHz, 28.0 MHz to 29.7 MHz, and 50.0 MHz to 54.0 MHz.

Guidance and manufacturer’s declaration – electromagnetic immunity

MESI mTABLET is intended for use in the electromagnetic environment specified below. The customer or the user of the above listed models should ensure that they are used in such environment.

NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies. 

NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people.

a) Field strengths from fixed transmitters such as base stations for radio (cellular/cordless) telephones, land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast, cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due to fixed RF transmitters an electromagnetic site survey should be considered. If the measured field strength in the location in which the MESI mTABLET is used, exceeds the applicable RF compliance level above, the above listed models should be observed to verify normal operation. If abnormal performance is observed, additional measures may be necessary, such as reorienting or relocating the above listed models. 

b) Over the frequency range from 150 kHz to 80 MHz, field strength should be less than 3 V/m.  

c) The ISM (industrial, scientific and medical) bands between 0.15 MHz and 80 MHz are: 6.765 MHz to 6.795 MHz; 13.553 MHz to 13.567 MHz; 26.957 MHz to 27.283 MHz; and 40.66 MHz to 40.70 MHz. The amateur radio bands between 0.15 MHz and 80 MHz are: 1.8 MHz to 2.0 MHz, 3.5 MHz to 4.0 MHz, 5.3 MHz to 5.4 MHz, 7 MHz to 7.3 MHz, 10.1 MHz to 10.15 MHz, 14 MHz to 14.2 MHz, 18.07 MHz to 18.17 MHz, 21.0 MHz to 21.4 MHz, 24.89 MHz to 24.99 MHz, 28.0 MHz to 29.7 MHz, and 50.0 MHz to 54.0 MHz. 

Distanze di separazione consigliate tra le apparecchiature di comunicazione RF portatili e mobili e i modelli sopra elencati.

The MESI mTABLET is intended for use in the electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the models listed above can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the models listed above as recommended below, according to the maximum output power of the communication equipment. 

For transmitters rated at a maximum output power not listed above, the recommended separation distance d in metres (m) can be determined using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer. 

NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies. 

NOTE 4: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people. 

Important labels

The symbols on the labels on the bottom of the device, the packaging and the instructions provide important information about the device. The symbols are described below.

6-2025 / V. 2.2