MESI mTABLET BP module

No, because these are ultrasound waveforms. With our device, we don’t use the ultrasound probe. We receive pressure waveforms. We have a digital cuff that inflates and stops the blood flow momentarily and then starts deflating. As it starts deflating, we capture the oscillations (single heartbeats). These oscillations are then high-pass filtered, and through the algorithm we receive we receive the calculation of the BP. 

Check that the cuffs are properly attached, then reset the module and try taking the measurement again. If the problem persists, please contact Support. 

1. Incorrect cuff placement. Please refer to the instructions for use to ensure the cuffs are placed correctly. 
2. The wrong cuff size has been used. Please refer to the instructions for use to select the correct size.  

If the error is repeated, critical ischaemia may be present. Check the positioning of the cuffs and take the measurement again.

Remind the patient to stay still while the measurement is being taken, and then repeat the measurement.

Refer to the instructions for use for information on cuff placement. Check the position of the cuff, then take another measurement.

Repeat the measurement. If the error is repeated, it means that the measured value is outside the device's measurement range.

Repeat the measurement. If the error is repeated, the measured value is outside the measurement range of the device.

Please check that the cuff is positioned correctly, and refer to the instructions for use to ensure that the correct size has been chosen. If you experience any problems, please contact Support.

The cuff is either not attached, or not attached correctly. Please ensure that the cuff is positioned in accordance with the IFU. Also, check that you are using the correct size of cuff.

Repeat the measurement. If the error is repeated, it means that the measured value is outside the device's measurement range.

Repeat the measurement. If the error is repeated, it means that the measured value is outside the device's measurement range.

Repeat the measurement. If the error is repeated, it means that the measured value is outside the device's measurement range.